| | CPCI-6780 |  | Price: 1800$
 add to my interests |
Detailed features:
6U CompactPCI Intel Celeron/Pentium III CPU Module With VGA(815E with 4MB display cache), Triple LAN, Ultra II Wide SCSI, CompactFlash and 4 USB Interfaces
CPU
Socket370 FC-PGA socket supports Intel Celeron/Pentium III up to 1.3GHz
FSB
66/100/133MHz
Cache
256KB for Pentium III (100/133MHz); 128K for Celeron (66/100MHz)
Chipset
Intel 815E B-stepping with ICH2 chipsets
BIOS
Award BIOS
Memory
Three 168-pin DIMM sockets support up to 512MB un-buffered SDRAM, PC-100/133 supported
IDE Interface
One 44-pin (primary) EIDE connector on front CPU module, supports on-board 2.5" notebook size HDD or flash disk
-Two 40-pin EIDE conectors on rear transition module, PIO Mode3/4 and Ultra DMA/33 supported
Super I/O
Winbond W83627HF (or compatible)
Parallel Port
Two Bi-directional SPP/EPP/ECP modes parallel ports (Primary port on front CPU module, secondary port on rear transition module)
FDD Interface
One FDD interface by J3 rear I/O supports two floppy frives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) another 34-pin FDD interface on rear I/O transition module
Serial Ports
Two 16C550 UARTs compatible RS-232 COM ports on front CPU module. (Expendable one 16C550 UARTs compatible one RS-232 and one RS-232/422/485 selectable serial ports by using of rear transition module)
USB Interface
Four USB ports, two ports on front CPU module, another two ports on rear I/O transition module. (USB Specification Rev. 1.1 compliant)
Watch-dog Timer
Programmable I/O port 2Eh and 2Fh to configure watch-dog timer, 1~255 min./sec. timer
Hardware Monitoring
Winbond W83782D built-in W83627HF, monitors CPU temperatures/fan/system temperatures/DC Voltages
Display(CPCI-6780 and CPCI-6780-01)
-Intel 815E build-in hyper-pipelined architecture 3D graphics engine
-AGP 2X, ACPI and VESA compliant
-Supports display memory up to 10MB(by sharing)
-On-board 4MB display cache
-1600X1200 resoluton, supports VGA rear I/O
LAN
Two Intel 82559 chipsets with two RJ-45 LAN ports on front CPU module, 10BaseT/100BaseTX Ethernet (Another LAN port on rear I/O transition module with ICH2 controller)
SCSI
(CPCI-6780-01/02 and CPCI6780RS rear I/O module are required)
LSI (SYMBIOS) 53C859 Ultra II Wide SCSI controller featuring LVD by J4 rear I/O
Flash Disk Interface
-CompactFlash type-II socket on front CPU module by removable transition daughter board
-On-board housing for 2.5" flash diskon front CPU module
-DiskOnModule by 40-pin IDE port of rear I/O transition module
Mechanical
6U, 8HP wide with 233mm X 160mm X 40.6mm (9.17" X 6.30" X 1.60"), including 2.5" HDD
Front Panel LEDs and Switch
Power status/IDE activity/LAN/SCSI/LVD/SE LED indicators and system reset switch
Operating Temperature
0 to 60 C (32 to 140 F)
Storage Temperature:
-40 to 80 C
Certification
CE, FCC, HALT (temperature and vibration stress) |
|
Specifications:
| CPU Type | Socket370 FC-PGA socket supports Intel Celeron/Pentium III up to 1.3GHz | | FSB | 66/100/133MHz | | Chipset | Intel 815E B-stepping with ICH2 chipsets |
| |  | | |
